Create your own back yard oasis with our Automatic Retractable Pool Enclosures and Automatic Pool Covers

The Single Peak roof profile is technically known as a "Gable Roof" design architecturally. It consists of a single sloping surface on each side of a central ridge at the top of the roof. The symmetrical design easily sheds snow and rainwater and compliments many architectural building styles. It is most suited to narrower spans but is also available up to 50 feet wide or more, depending on the snow loads and site conditions. All of the COVERS in Play enclosure systems are specifically engineered to meet building code requirements for each installation site and are warrantied against failure. As a fixed structure with various fenestration options or operable, opening to each end or all one way, a Single Peak enclosure is a practical , economical solution for protecting your outdoor environment and allowing for year round use of the area.

Peak Lean-To Enclosures- Operable or Fixed

Lean-to enclosures are a simple solution for a tight space constraint. Turn your pool or patio parallel with the building or house wall and let COVERS in Play enclose the area. The clean straight line appearance of the single peak roof profile offers a low 12 degree pitch allowing for installations in otherwise hard to deal with situations. The enclosure can be designed to open from the center or over the end bays if desired, or to move all to one side, with the inclusion of bifolding doors in one endwall. Or, a fixed structure could be built with any number of man doors, sliding doors and windows with flyscreens for abundant fresh air and ventilation.

The Triple Peak roof profile is technically known as a gambrel roof. It has two angled slopes on both sides of a central ridge and has a pleasing architectural appeal. Apart from adding more height and headroom at the wall interfaces, it lends itself to more structural strength, allowing for wider spans without supporting columns. The system is designed with various thicknesses of rafter to accommodate any structures inside the enclosures like water slides, fountains, or any other height requirements. With telescoping bays, the heights can be higher at one end and lower at the other. Made as a fixed enclosure, the system is a consistent height throughout and can have number of man doors, sliding door bifolds, or windows as may be desired.

Lean-To enclosures offer a unique opportunity to keep the covered pool or patio area closer to the house and therefore allow for easier direct access and use in more confined space. The triple peak roof profile allows for a higher overall roof heights and a wider footprint out from the main building wall on which it is mounted. The unique gambrel style offers a practical space solution and an unequalled visual effect. The system can be made operable, opening from the center outwardly, towards the ends or made to slide all one way, with the inclusion of bifolding doors at one end. It can also be made more economically as a fixed structure with several sliding door for ventilation and access/egress.

Amazing architectural affects can be achieved with COVERS in Play glazed roofing systems. Fully operable roofs can be made to open partially or clear an entire roof opening if desired Practically any size can be accommodated and with varying curb heights and roof profiles. Roofs can be fixed and completely airtight as with any fixed skylite and therefore entirely suitable for cathedral type ceilings or any other application to allow for brighter daylight effect.